点击图片查看大图
特性：本品为马来酸酐接枝的PP共混物，外观：白色或淡黄色颗粒，接枝率：0.6-1.0%，熔融指数(190℃，2.16kg)：40-80g/10min。
Property:The product is the mixture that MAH was grafted onto PP. Appearance: white or light yellow particle; Grafting ratio: 0.6-1.0%; MFR(190℃，2.16kg):40-80g/10min.
用途：１．用作玻纤和矿物填充聚丙烯的界面改性剂：聚丙烯接枝马来酸酐赋予了聚烯烃极性和可粘接性，只要加入少量(5%)的马来酸酐接枝聚丙烯，就可以大幅度提高聚丙烯与玻纤、滑石粉、云母等无机填料的粘合力。
２．用作聚丙烯和含有极性基团树脂合金的相容剂：马来酸酐接枝聚丙烯应用面广，可作为PA/PP，PA/PE共混合金的相容剂。
３．赋予聚丙烯涂覆性和喷漆性：添加(10%-20%)的接枝母粒，还可以改善聚丙烯的涂覆性和喷漆性能。
Usage: 1.Used as interface modifier in PP with filling glass-fiber and mineral: PP can be given polarity and adhesiveness if MAH was grafted onto it. Adding a small amount of HF-1 can improve widely tensile strength, tension strength, impact strength and adhesiveness in PP and glass-fiber, talc powder, mica, etc.
2.Used as compatibilizer in alloy of PP and resin which has polar group: HF-1 (grafted compound) was applied widely. It can be used as compatibilizer in blending alloy of PA/PP, PA/PE.
3.Given coating and sprayability: Adding the grafted master batch (10-20%) can develop coating and sprayability of PP.
表一（Figure 1）：PP树脂玻纤增强典型数据:（Typical data of PP/GF）
|
性能（Performance） |
单位（Unit） |
PP+GF30% |
PP+ GF30%+5%(HF－1) |
|
拉伸强度（Tensile strength） |
MPa |
43 |
88 |
|
弯曲强度（Flexural strength） |
MPa |
69 |
125 |
|
悬臂梁冲击强度 （Izod notched impact strength） |
KJ/m2 |
6 |
14.5 |
表二（Figure 2）：PP树脂矿物填充典型数据（Typical data of mineral filling PP）
|
性能（Performance） |
单位(Unit) |
PP+滑石 (talc power )20% |
PP+滑石 (talc power )20%+5%(HF－1) |
|
拉伸强度（Tensile strength） |
MPa |
35 |
47 |
|
弯曲强度（Flexural strength） |
MPa |
68 |
73 |
|
悬臂梁冲击强度 （Izod notched impact strength） |
KJ/m2 |
5 |
8 |
使用方法：按比例与PP、PA等树脂混合造粒。、
Dosage: HF-1 and PA、PP and so on are in proportion to blending and making batch.
包装及储运：20Kg牛皮纸袋内衬塑料袋装，按非危险品，在干燥条件下储运，避日光、雨淋。
Packing, storage and transportation:Packed in 20Kg cow parchment takes with plastic takes inside. Not dang