点击图片查看大图
厂家供应 透明PS相容剂 塑料相容剂
特 性： 本品为马来酸酐接枝的PS共混物，外观：淡黄色颗粒，接枝率：15-18%，熔融指数：(200℃，5Kg)：1.0-3.0g/10min。该产品具有接枝率高，接枝完全，无毒、无味的特点，克服了马来酸酐接枝物浓烈的气味。
Property: The product is the mixture that MAH was grafted onto PS. Appearance: light yellow particle; Grafting ratio: 15-18%; MFR(200℃,5Kg):1.0-3.0g/10min. The product is of high grafting ratio, grafting thoroughly, no poison, no smell. Overcoming the strong thick which made by MAH was grafted onto the resin..
用 途： 1．可作为玻纤增强ABS、AS、矿物填充ABS界面改性剂。马来酸酐接枝PS赋予了ABS极性，只要添加少量的马来酸酐接枝PS就可以大幅度提高ABS、AS与玻纤的结合力，使增强ABS、增强AS的拉伸强度、弯曲强度等明显提高。
2．可作为尼龙与ABS，PC与ABS共混合金的相容剂。
Usage:
1. Used as interface modifier in glass-fiber strengthening ABS, AS and filling ABS. ABS can be given polarity if MAH was grafted onto it. Adding a little KT-5 can improve widely the adhesive between ABS and AS, strengthen ABS, tensile strength and tension strength of AS and so on.
2. Used as compatibilizer in blending alloy of nylon and ABS, PC and ABS ABS and TPE.
表一
|
性能（Performance） |
单位（Unit） |
ABS+GF30% |
ABS20%+GF30%+5%(HF－5) |
|||
|
拉伸强度（Tensile strength） |
MPa |
|
120 |
|||
|
弯曲强度（Flexural strength） |
MPa |
143 |
||||
|
悬臂梁冲击强度 （Izod notched impact strength） |
KJ/m2 |
10 |
注：上述数据为实验典型值，真实可靠。仅供参考，不作为正式质保承诺。
Notice: Above data is experiment typical, true and reliable .It isn’t commitment of the quantity guarantee, but reference
使用方法：按比例与ABS、PC、PA等树脂混合造粒。
包装及储运：25Kg牛皮纸袋内衬塑料袋装，按非危险品，在干燥条件下储运，避日光、雨淋。
Packing, storage and transportation:
Packed in 25Kg cow parchment takes with plastic takes inside. Not dangero